fresh and natural herb leaves


If you’re wondering how you can save energy, read the following tips to get you started. Whether you’re into energy saving to join arms with the green revolutionaries or you simply just want to reduce your bill or both doesn’t really matter. The world is always all the better for every energy saved by a single person. A few energy saving tips that are easy to follow are provided below. They come from Earth4Energy by Michael Harvey, Green DIY Energy Guide and the USDOE.

A good place to start is your lighting system. Saving money takes as simple as replacing your lamps with one of those energy saving kinds. Most importantly, these lamps give you the most value for your money because they are able to convert all the energy they consume into light energy. Incandescent lamps just give off heat for most of the energy they use and produce very little light.

One of the more common tips you’ll hear is “Turn off the lights when not in use.” But little do most of us know that this isn’t always the best advice to follow. The on-off switch can shorten the average life span of your lamps if you use it constantly during the day. The result would be you replacing bulbs more often, and the companies making them, using more energy to produce them. This equals to lesser efficiency, more waste and higher cost. Leaving the light on when you’re only leaving the room for less than 15 minutes is a basic rule of thumb you can follow that the government suggests. Otherwise, turning the light off would be the sounder idea. One important step you can take to increase your savings is to actually check out in detail your energy bill and make a quick computation on how much you’ll end up saving by turning the light off compared to how much it would cost to replace them. For areas with higher electricity charges, this is especially helpful.

Cleaning your lamps when they have noticeably gathered dust is a good practice to get into. You can also follow a 3- to 6-month rule. Needless to say, the dust will simply make it harder for your lamps to illuminate a room. Also, if you want to aid your lamps in effectively lighting up your home, using light-colored paints is almost a must. In addition, in order to increase your lighting system’s efficiency, you should make it a point to repaint and clean your rooms; less dust means better reflection and brighter illumination.

Finally, nothing is more beneficial than taking advantage of the sun’s natural light during daytime. You’ve employed a good daylighting technique if your house can keep the light in without storing the heat that goes with it. One rule you can use to make sure this is the case is to keep your windows facing to the north and south and not the east or west. If you want to take it up a notch, you can power some of your lighting fixtures using a homemade solar panel. Green DIY Energy Guide Review at ReviewMOZ.org should give you a guide on how to make one that is simple to do and also very affordable.

Rate this post